High Density Cartridges
Heater - Quality Cartridges Heater from
Italy Surface load 1000 C maximum
- Diameter 6.5, 8.0, 10.0, 12.5,
16.0, 20.0 mm 1/4,3/8,1/2,5/8 inch
- Length25 mm up to 1000 mm
- Any Voltage
- Within/without Thermocouple
- More than 1000 item standard size
Coil Nozzle Heater - Size 1.0 x 1.6 mm up to
- High watt with all connection
- Specic load
- 12 - 45 w/cm2
- Surface load 650 C maximum
- Any voltage, Any coil
- Within/without Thermocouple
J or K Type
- Coil type with Tangential,
Axial and radial exit
Mica Nozzle Heater - Standard power density for
Brass is 4.5 w/cm2 and for
stainless is 7.0 w/cm
- Standard Brass tubular sheath
(Alsoavailable in stainless steel)
- Any Voltage
- Perfect roundness
- Extremely small connecting cap
Thermocouple and
Resistance Sensors - Standards model is AISI 304,
310, 316, 316 and Incoloy Material
- Standards Type J (Fe-Cu-Ni),
Type K (Ni-Cr-Ni)
- RTD 100 or 2 x RTD 100 with
2,3,4 wires.
- Standard size or Made to order
Fittings Accessories - Taper and parallel Push-in Fittings
- Quick Fit M5,M6,1/8,1/4,3/8,1/2
- Threaded Adaptors M5, G1/8,
G1/4,G3/8,G1/2,G3/4,G1
- Tube Fitting and Speed Controlle
- PU/PE/Nylon/Air Hose
- Accessories
Insulation Jacket
(Saving Energy Product) - Energy saving insulation for air conditioned operation room for injection machine. and blow molding machine
- Tailor made size according to existing dimensions
- Maximum resistance temperature 900 C
Hand Pallet Truck - Capacity: 2000/2500/3000Kg
- Lowest forks height 85/75/65mm
- Lifting height 195/185/175mm
- Forks length 1000/1100/1150/1220mm
- Forks width 520/550/685mm
Semi Electric Stacker - Capacity 1000-2000Kg
- Lifting height 1600-3300mm
- Frame type Single Double
- Lowest forks 90mm
- Forks length 1000mm
Solenoid Valve - 100 Series Solenoid/Air Control Valve
- PU Series Solenoid Valve
- HV Series Hand Lever Valve
- 4F Series Foot Valve

MAIN MENU

Ceramic infrared heater

Features & Benefits

Surface temperature to 750 °C.
Mid-to-far wavelength infrared heat source provides uniform heat over a large area.
Primary emission inthe 3 - 10 micron range (no visible light), which is the most efficient wavelength for heating of platics, paper, textiles, and drying of most solvents.
Available with built-in type K thermocoupie.
Available in 122 x 60 mm, 245 x 60 mm, and 122 x 122 mm sizes.
Available with pink surface that turns to gray when heating providing evidence of correct operation.
Clean, non-contaminating, heat operation.
Glaze-coated ceramic body with no surface flaking or oxidation as on metal sheath elements.
Provides perfectly repeatable performance.
Easily arranged in large arrays that may be set up and controlled in zones.
Operating life over 5,000 hours minimizes machine downtime.
Iron alloy element wire provides longer life than nickeI-chrome alloy wires.
Resistant to thermal shock. Heaters are not damaged if hit by water spray.

Applications

Plastics:	Textiles:	Food:
Thermoforming	Drying dyed/printed fabric	Drying dyed/printed fabric
Vacuum forming	Curing latex coatings	Curing latex coatings
Curing extruded parts
Drying
Laminating
Ceramic:	Paint:	Electronics:
Drying glazes/pigments	Drying Iacquers/Hnishes	Preheat PCBs
	Baking Iacquers/finishes	IR reflow ovens for SMT
Thin Film Deposition:	Packaging:	Paper:
Vacuum coating substrates	Heat shrink	Speed drying coated paper
	Forming	Adhesive activation
Wood/Furniture:	Printing:
Heating bonded/painted/plastic coated components	Ink drying
Drying same components

Temperature-sensitive Colours

Our ceramic radiant infrared heaters are available also in temperature-sensitive colours: the heater is normally dark pink when cold, then turns grey when heated.

Therefore, the burned heaters can easily be located as they stay pink when the power is on.

Quartz Infrared Heaters
· The best source of radiant heat when a swift heater response is needed.
· Quartz tubes are mounted within a highly reflective stainless steel housing
· Medium wavelength radiation
· Power densities of up to 48 KW/m. Tension 230 V.

NEW PRODUCTS

Alum work platform

25 June 2011
Alum work platform Multi work platform Capacity 125-150Kg more

25 June 2011
Semi Electric Aerial Oder Picker. Max.platform height(H)mm 2720/3300. more
Ceramic infrared heater

25 June 2011
- Flat and Curved shape. - 245 x 60 mm, 122 x 60 mm, 122 x 122 mm. - Surface temperature to 750 C. - Available with built-in type K thermocouple. - Accessories more
Mica Nozzle Heater

25 June 2011
Standard power density for Brass is 4.5 w/cm2 and for stainless is 7.0 w/cm. Standard Brass tubular sheath (Alsoavailable in stainless steel). Any Voltage. Perfect roundness. Extremely small connecting cap. more