|
|
-
High Density Cartridges
Heater- Quality Cartridges Heater from
Italy Surface load 1000 C maximum
- Diameter 6.5, 8.0, 10.0, 12.5,
16.0, 20.0 mm 1/4,3/8,1/2,5/8 inch
- Length25 mm up to 1000 mm
- Any Voltage
- Within/without Thermocouple
- More than 1000 item standard size
-
Coil Nozzle Heater - Size 1.0 x 1.6 mm up to
- High watt with all connection
- Specic load
- 12 - 45 w/cm2
- Surface load 650 C maximum
- Any voltage, Any coil
- Within/without Thermocouple
J or K Type
- Coil type with Tangential,
Axial and radial exit
-
Mica Nozzle Heater - Standard power density for
Brass is 4.5 w/cm2 and for
stainless is 7.0 w/cm
- Standard Brass tubular sheath
(Alsoavailable in stainless steel)
- Any Voltage
- Perfect roundness
- Extremely small connecting cap
-
Thermocouple and
Resistance Sensors- Standards model is AISI 304,
310, 316, 316 and Incoloy Material
- Standards Type J (Fe-Cu-Ni),
Type K (Ni-Cr-Ni)
- RTD 100 or 2 x RTD 100 with
2,3,4 wires.
- Standard size or Made to order
-
Fittings Accessories - Taper and parallel Push-in Fittings
- Quick Fit M5,M6,1/8,1/4,3/8,1/2
- Threaded Adaptors M5, G1/8,
G1/4,G3/8,G1/2,G3/4,G1
- Tube Fitting and Speed Controlle
- PU/PE/Nylon/Air Hose
- Accessories
-
Insulation Jacket
(Saving Energy Product)- Energy saving insulation for air conditioned operation room for injection machine. and blow molding machine
- Tailor made size according to existing dimensions
- Maximum resistance temperature 900 C
-
Hand Pallet Truck - Capacity: 2000/2500/3000Kg
- Lowest forks height 85/75/65mm
- Lifting height 195/185/175mm
- Forks length 1000/1100/1150/1220mm
- Forks width 520/550/685mm
-
Semi Electric Stacker - Capacity 1000-2000Kg
- Lifting height 1600-3300mm
- Frame type Single Double
- Lowest forks 90mm
- Forks length 1000mm
-
Solenoid Valve - 100 Series Solenoid/Air Control Valve
- PU Series Solenoid Valve
- HV Series Hand Lever Valve
- 4F Series Foot Valve
